Transport your Tadpole Recumbent, D Trike or Handcycle with Ease
The Easy Load Tray uses the transporting Vehicle’s 2” receiver hitch. It lays out flat to load your trike or handcycle from either side with two ramps. Three ramps are available if desired. There are two wheel chocks on the outside wheel trays and tie down straps on all three wheel trays. It folds vertically when unloaded therefore it is not required to remove the Tray when the trike or handcycle is not loaded.
Carries one tadpole trike, D trike or handcycle outside the transporting vehicle.
Using a ramp to load your recumbent bike onto your car offers several advantages:
1. Ease of Loading: Ramps provide a gradual incline, making it easier to push or roll your recumbent bike onto the tray compared to lifting it directly. This reduces physical strain and the risk of injury during the loading process.
2. Protection of Bike and Car: Ramps typically have a smooth surface, which helps prevent scratches or damage to both your recumbent bike and your car during loading and unloading. This is especially important for expensive or delicate bikes and cars.
3. Independence and Convenience: With a ramp, you can load and unload your recumbent bike without requiring assistance from others. This is particularly advantageous if you frequently transport your bike alone or if you're in a situation where help may not be readily available.
The standard Easy Load Ramp System (ELT)
- One Receiver Hitch Insert
- One Ramp Support “T”
- Two 5’ Ramps with Ramp Extensions Four Ramp Spacers and the necessary hardware to install the RHI and “T” on a trike transporting vehicle.
- Folds vertically when not loaded
- 2" Receiver needed for transporting vehicle
Options
ELT-3R - Three 5" Ramps with Ramp Extensions Four Ramp Spacers and the necessary hardware to install the RHI and “T” on a trike transporting vehicle.
Description
Transport your Tadpole Recumbent, D Trike or Handcycle with Ease
The Easy Load Tray uses the transporting Vehicle’s 2” receiver hitch. It lays out flat to load your trike or handcycle from either side with two ramps. Three ramps are available if desired. There are two wheel chocks on the outside wheel trays and tie down straps on all three wheel trays. It folds vertically when unloaded therefore it is not required to remove the Tray when the trike or handcycle is not loaded.
Carries one tadpole trike, D trike or handcycle outside the transporting vehicle.
Using a ramp to load your recumbent bike onto your car offers several advantages:
1. Ease of Loading: Ramps provide a gradual incline, making it easier to push or roll your recumbent bike onto the tray compared to lifting it directly. This reduces physical strain and the risk of injury during the loading process.
2. Protection of Bike and Car: Ramps typically have a smooth surface, which helps prevent scratches or damage to both your recumbent bike and your car during loading and unloading. This is especially important for expensive or delicate bikes and cars.
3. Independence and Convenience: With a ramp, you can load and unload your recumbent bike without requiring assistance from others. This is particularly advantageous if you frequently transport your bike alone or if you're in a situation where help may not be readily available.
The standard Easy Load Ramp System (ELT)
- One Receiver Hitch Insert
- One Ramp Support “T”
- Two 5’ Ramps with Ramp Extensions Four Ramp Spacers and the necessary hardware to install the RHI and “T” on a trike transporting vehicle.
- Folds vertically when not loaded
- 2" Receiver needed for transporting vehicle
Options
ELT-3R - Three 5" Ramps with Ramp Extensions Four Ramp Spacers and the necessary hardware to install the RHI and “T” on a trike transporting vehicle.